Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Melrose, NY
We provide independent Lennox air duct cleaning across Melrose, and the thing that sets our work apart here is the building itself: the pre-war tenements and mid-century apartment blocks of ZIP 10455 share masonry exhaust shafts that tie kitchens and baths together, so a Lennox air handler in one unit is often moving air that started somewhere else. That changes how the job is scoped, sequenced, and sealed. Our technicians have up to 10 years of experience with Lennox equipment, and we’re an independent shop, not a Lennox dealer or authorized agent. Call (866) 937-8817 to book a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm.
Why Melrose Residents Choose Us for Lennox Service
Melrose landlords, co-op boards, and property managers call us because we’ve handled enough Lennox systems to know where they fail. The Merit Series and Elite Series air handlers have a blower wheel that fills with dust and grease fast in these buildings, and once it’s out of balance the whole apartment feels it. We don’t guess at that. We pull the blower, inspect it, clean it properly, and tell you what we see.
Scheduling is straightforward. We book jobs in Melrose building by building, coordinate access with supers and managing agents, and work through a building’s units in a sequence that makes sense rather than bouncing between addresses. The local pro is licensed and insured as their state requires, and every job is priced flat per system, agreed in writing before any work starts. No per-vent pricing. You get before-and-after photos of your own ductwork, not stock images.
Quality parts that fit matter as much as the cleaning itself. When a blower motor or control board needs replacing, OEM Lennox parts are the right call for compatibility. For filter racks, flex duct, and sealants, quality aftermarket equivalents do the job well and cost less. We’ll tell you which is which.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Melrose
- Blower wheels packed with grease in Merit and Elite air handlers. In Melrose buildings where kitchen exhaust ties into shared shafts, lint and cooking grease recirculate into the return and coat the blower wheel. The imbalance cuts airflow and makes the system work harder than it should. Pulling and cleaning the wheel is usually the first fix.
- Mildew and biofilm on Signature Series evaporator coils. Melrose summers run hot and humid, and basement and riser ducts pull that moisture straight across the coil. The result is a musty smell and cooling that never quite keeps up. Coil cleaning and moisture control go together here.
- Sagging and torn flex duct at Lennox supply plenums. Retrofitted ductwork in older Melrose tenements often has flex runs that droop or tear at the joints. That means leakage, pest entry, and air that never reaches the room it’s meant for. We inspect the full run, not just what’s visible.
- Cracked heat exchangers in older Lennox furnaces. Undersized or debris-restricted ducts make a furnace run hot, and heat exchangers don’t like that. The constant soot and construction dust around Melrose adds to the load. A cracked exchanger is a safety issue, and we treat it as one.
- Cross-contamination through shared masonry shafts. Smoke from one apartment’s kitchen showing up in a neighbor’s bathroom exhaust is common in Melrose tenements. Cleaning a single unit without addressing the shaft just moves the problem. Building-wide coordination is the fix.
Lennox Service in Melrose: What Local Conditions Mean for Your Equipment
The shared masonry exhaust shafts in Melrose’s pre-war tenements run the full height of the building, serving kitchens and baths on every floor. For Lennox owners, that single fact reshapes the whole job. A Signature Series air handler pulling return air near a shaft can draw in cooking grease, smoke, and lint from units above and below. Over a heating season, that builds up on the coil and blower. Cleaning one apartment in isolation leaves the shaft dirty and the problem comes right back. We scope these jobs building-wide: inspect the riser system, clean what serves each Lennox unit, seal the gaps where cross-contamination happens, and document what we found so a co-op board or managing agent has a record. That’s the difference between a clean that lasts a season and one that lasts years.
Lennox Models & Products We Service in Melrose
We service Lennox Merit Series, Elite Series, and Signature Collection equipment, including the Dave Lennox Signature Collection, across Melrose. That covers air handlers, furnaces, evaporator coils, and the duct interfaces that connect them to a building’s riser and corridor system. We’re an independent Lennox service provider, which means we’re not manufacturer-affiliated or authorized, and we don’t claim otherwise. What we bring is repeated, focused experience with how Lennox equipment is built and where it fails in dense urban buildings.
Our three core sub-services for Lennox systems in Melrose are full system cleaning with Rotobrush and Nikro mechanical equipment, video inspection so you see the inside of your ductwork before and after, and duct sealing to close the gaps that let air escape or cross between units. Abatement Technologies air scrubbers and negative-air containment run throughout, so debris stays contained instead of drifting through the apartment. Parts are chosen for fit: OEM for critical components, quality equivalents for wear items. We advise repair when the system is otherwise sound and recommend replacement when a heat exchanger is compromised or several major components fail close together.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Melrose
Pricing is per system, agreed in writing before work starts. A Lennox duct cleaning in a Melrose apartment or co-op unit typically falls in a range set by square footage served, the number of risers and branches, how much grease and soot has accumulated, and whether duct sealing is part of the scope. Whole-building work for a Melrose co-op or rental building is quoted per unit after a walkthrough.
The free estimate includes a look at the air handler, the visible duct runs, and the shaft connections, plus a video inspection where it helps clarify the scope. Because everything is flat-priced per system, you won’t get a low figure on the phone that grows once a technician is on site. The written estimate sets the final price. Call (866) 937-8817 for an exact quote. Estimates are free.
Serving Melrose, NY – Our Local Coverage Area
We serve Melrose and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Melrose
Yes, and it often is. In Melrose tenements, kitchen and bath exhaust ducts tie into shared masonry shafts that run the full building height, so lint and grease from other units can coat your Lennox blower wheel and coil. A technician should inspect the riser system, not just the unit. Call (866) 937-8817 to schedule an inspection. Estimates are free.
For most Melrose co-op buildings, every two to three years is a reasonable starting point, adjusted for how heavily the kitchen exhaust shafts are used and whether construction dust is present. Buildings with heavy cooking loads or ongoing renovation may need it more often. A video inspection tells you what your building actually needs.
Yes. Coil cleaning on a Signature Series system is done with the right equipment and containment, and the coil’s fin pack is treated carefully throughout. The mildew and biofilm that build up in Melrose’s humid summers come off with proper cleaning, and negative-air containment keeps the debris out of the apartment.
If cracks are found in a heat exchanger, replacement is the right call, not repair. A compromised exchanger is a safety issue. We’ll tell you plainly what we found and what it means, and we don’t recommend running a furnace with a cracked exchanger.
Yes. We book Melrose buildings unit by unit in a coordinated sequence, working with supers and managing agents so access is arranged and the shared shafts get cleaned as part of the job. Call (866) 937-8817 to set up a building walkthrough. Estimates are free.
It’s priced per system, agreed in writing before work starts, and the free estimate sets the final price. Whole-building work for a Melrose co-op or rental is quoted per unit after a walkthrough. Call (866) 937-8817 for an exact quote. Estimates are free.
Service Areas Near Melrose
We serve Lennox owners in Melrose and the neighborhoods around it, including Lennox service across Melrose, plus Mott Haven, Longwood, Concourse, and East Harlem. Each has its own building stock and duct patterns.
Book Your Lennox Service in Melrose Today
Whether you manage a Melrose building or own a single unit, we’ll walk the system, show you what we find, and quote a flat price per system before anything starts. Call (866) 937-8817 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Harlem.